Pin & Bush Couplings RLB

Your Advantages

Flange Couplings of the RINGFEDER^® TNF 5571 type are used to reliably establish an absolutely backlash-free connection between two shafts by means of frictional locking. They are the more powerful and more economic alternative to conventional press fits. For assembly, the flange halves are simply pushed onto the shaft ends and friction-locked by means of shrink discs – the flanges are then also connected using a simple screw connection. Neither additional components such as keyways or wedges nor heating of the inner section or cooling of the outer are are necessary.

RINGFEDER^® Flange Couplings are torsionally rigid and are characterized by high concentricity as well as the admissibility of large shaft tolerances. In addition to highest torques, they also transmit occurring bending loads as well as axial and radial forces without wear and with high precision.

Flange couplings of the RINGFEDER^® TNF 5571 type are particularly convincing due to the following features:

• Zero backlash, wear and maintenance
• Robust connection with high strength reserves
• Direct power transmission between shaft and flange
• Highest concentricity
• Easy mounting and dismounting
• Shaft diameter d_w up to 540 mm (21.259 inch)
• Outer diameter A up to 1,200 mm (47.244 inch)
  
• Torque range T up to 2,000,000 Nm (1,475,124.2 ft·lb)

ATEX Compliance

For maximum safety in explosion-endangered areas, RINGFEDER^® Flange Coup­lings can of course be supplied in compliance with ATEX according to Product Directive 2014/34/EU and DIN EN ISO 80079-36:2016 if required.

Main Areas of Use

• Gearbox and Motor Engineering
• Conveyor Systems (e.g. Belt Drives)
• Mixing and Process Technology
• Crushing Units
• Hydro Power Technology
• Elevators

Versions

Flange Couplings of the RINGFEDER^® TNF 5571 type are available in two different versions according to the respective requirements:

• Version A – Shrink discs with hexagon head screws (HM = External Centering; HF = Internal Centering)
• Version B – Shrink discs with hexagon socket screws (HM = External Centering; HF = Internal Centering)

Technical Information

Moreover, please observe the detailed selection and operating criteria in the documents Product Paper Flange Coup­lings RINGFEDER^® TNF and Tech Paper Flange Coup­lings RINGFEDER^® TNF 5571.