Locking Assemblies for Bending Loads
Uncompromising performance under extreme loads with specially developed RINGFEDER® Locking Assemblies for Bending Loads: One of the most challenging applications for our locking devices are belt drums which are used, e.g., in mostly large-scale conveyor systems for iron or copper ore, coal and other mineral resources. The shaft-hub connections used between the drum shaft and the drum base are subject to enormous additional stresses by axial and transverse forces and especially by bending loads which – in addition to the required torque – must be transmitted constantly and reliably. Therefore, RINGFEDER® Locking Assemblies for Bending Loads have been optimized in regard to material strength, surface quality and internal tension in order to effectively prevent e.g. shaft breakage, axial migration or plastic deformation of the drum base and thus cost-intensive repairs and production downtimes. The backlash-free, friction-fit locking devices ensure highest possible operational dependability in belt drum applications and are also convincing due to their easy handling as well as complete freedom from wear and maintenance.
Locking Assemblies for Bending Loads
Selection Tool
Use our Selection Tool for a quick and easy preliminary determination of a RINGFEDER® Locking Assembly optimized for Bending Loads suitable for your individual requirements.
RfN 7012
Slim, Universally Applicable Version for Maximum Bending Loads
- Without Axial Displacement
- Inner Diameter d: 50-1,000 mm
- Outer Diameter D: 80-1,100 mm
- Overall Length L: 33.5-130 mm
- Torque T: 1,777-1.9 Mio. Nm
- Bending Load Mbmax: 377,570 Nm
RfN 7012.2
Same Dimensions as RfN 7012, Specially Optimized for Extreme Loads in Belt Drums
- Without Axial Displacement
- Inner Diameter d: 130-800 mm
- Outer Diameter D: 180-910 mm
- Overall Length L: 52-130 mm
- Torque T: 10,409-1.4 Mio. Nm
- Bending Load Mbmax: 392,150 Nm
RfN 7015.0
Combined Transmission of Maximum Forces and Torques, Excellent Centering Capabilities
- Self-Centering
- Without Axial Displacement
- Inner Diameter d: 100-800 mm
- Outer Diameter D: 145-910 mm
- Overall Length L: 77-227 mm
- Torque T: 11,297-2.2 Mio. Nm
- Bending Load Mbmax: 777,900 Nm
RfN 7015.1
Version Similar To RfN 7015.0, Reduced Surface Pressure for e.g. Thin-Walled Hubs
- Self-Centering
- Without Axial Displacement
- Low Surface Pressure
- Inner Diameter d: 100-800 mm
- Outer Diameter D: 145-910 mm
- Overall Length L: 75-220 mm
- Torque T: 6,575-1.1 Mio. Nm
- Bending Load Mbmax: 822,500 Nm
RfN 7515
Highest Torques, Axial and Radial Forces Due to Extended, Flat Cones
- Self-Centering
- Inner Diameter d: 60-640 mm
- Outer Diameter D: 95-735 mm
- Overall Length L: 58-177 mm
- Torque T: 4,299-1.3 Mio. Nm
- Bending Load Mbmax: 631,658 Nm