• Both CurrentPage.Property["TopNavigationRoot"] Session["TopNavigationRoot"] are null!

TSCHAN® TNT 2424

Rigid disc coupling with keyway-hubs

The whole coupling and the torque limiter can be dismounted without displacement of the motor, driven shaft and of the hubs.

TSCHAN® TNT 2424

metric inch
Size nM MO d2kmin d2kmax A L L1 TKNmin TKNmax nmax Gw
  pcs.   mm mm mm mm mm Nm Nm 1/min kg
058-090 4 a 30 110* 200 180 236 670 1950 3000 65
058-090 4 b 30 110* 200 180 236 1350 3900 3000 65
058-090 4 c 30 110* 200 180 236 2000 5800 3000 65
110-120 3 a 40 120 242 200 265 640 1850 2700 86
110-120 3 b 40 120 242 200 265 1850 5500 2700 86
110-120 6 a 40 120 242 200 265 3850 11000 2700 86
227-160 3 a 60 160 312 245 326 880 2600 2300 188
227-160 3 b 60 160 312 245 326 2600 7550 2300 188
227-160 6 a 60 160 312 245 326 5300 15200 2300 188
227-160 9 a 60 160 312 245 326 7900 22700 2300 188
424-200 3 a 80 200 420 292 387 1200 3550 1900 350
424-200 3 b 80 200 420 292 387 3550 10600 1900 350
424-200 6 a 80 200 420 292 387 7350 21200 1900 350
424-200 9 a 80 200 420 292 387 11000 31800 1900 350
424-200 12 a 80 200 420 292 387 14700 42400 1900 350
Size nM MO d2kmin d2kmax A L L1 TKNmin TKNmax nmax Gw
pcs. inch inch inch inch inch ft-lbs ft-lbs rpm lbs
058-090 4 a 1.181 4.331* 7.874 7.087 9.291 494 1438 3000 143
058-090 4 b 1.181 4.331* 7.874 7.087 9.291 996 2877 3000 143
058-090 4 c 1.181 4.331* 7.874 7.087 9.291 1475 4278 3000 143
110-120 3 a 1.575 4.724 9.528 7.874 10.433 472 1365 2700 190
110-120 3 b 1.575 4.724 9.528 7.874 10.433 1365 4057 2700 190
110-120 6 a 1.575 4.724 9.528 7.874 10.433 2840 8113 2700 190
227-160 3 a 2.362 6.299 12.283 9.646 12.835 649 1918 2300 414
227-160 3 b 2.362 6.299 12.283 9.646 12.835 1918 5569 2300 414
227-160 6 a 2.362 6.299 12.283 9.646 12.835 3909 11211 2300 414
227-160 9 a 2.362 6.299 12.283 9.646 12.835 5827 16743 2300 414
424-200 3 a 3.150 7.874 16.535 11.496 15.236 885 2618 1900 772
424-200 3 b 3.150 7.874 16.535 11.496 15.236 2618 7818 1900 772
424-200 6 a 3.150 7.874 16.535 11.496 15.236 5421 15636 1900 772
424-200 9 a 3.150 7.874 16.535 11.496 15.236 8113 23455 1900 772
424-200 12 a 3.150 7.874 16.535 11.496 15.236 10842 31273 1900 772

TSCHAN® TNT 2424

  • TSCHAN heavy load couplings in the TNT series are specially designed for overload protection in the heavy load industry. The heart of the couplings is in the standardised switching units, up to twelve of which are located around the circumference of the coupling. This achieves great flexibility with regard to disengagement torque, execution and coupling size.

    Operation

  • The switching units (1) create the connection and the torque transmission between the drive side (2) and the output end (3) of the coupling. To do this, steel balls (4) are pressed by spring force (5) into a conical resting position (6). If the axial force that is created in the event of overload exceeds the disengagement torque set on the switching units then the steel balls come out of their resting position and cause a constant activation or a separation of the two halves of the coupling. In this condition the coupling is disengaged and free running of the coupling is ensured. After disengagement the coupling can be returned to its operating condition by striking the pressure pin (7) with a rubber or plastic hammer. It is possible to adjust the disengagement torque in each setting range. We would be pleased to send you our setting chart on request.
  • Mechanical limit switch

  • The TNT series can also be adapted with an optional dial and mechanical limit switch on the motor side. These switch signals can be used to switch off the drive and send out an acoustical or optical signal at the same time.
  • The great flexibility of TSCHAN TNT heavy load couplings means that solutions can also be carried out beyond standard products.

Characteristics

  • Flexible design
  • Fast separation of the coupling halves in the event of overload
  • Disengagement torque can be set exactly
  • Units can be set without dismantling
  • Simple and fast latching following overload through marking
  • Evaluation of axial movement possible by proximity switch or mechanical limit switch
  • Reconciliation of shaft misalignment
  • Simple operation
  • Good precision of disengagement recurrences after long standstill periods

Applications

  • Excavator
  • Extruders
  • Industrial shredders
  • Industrial conveyors
  • Levellers
  • Marine propulsion
  • Rolling mills
  • Steel plants
  • Shovel excavators
  • Test stands
  • Tunnel boring machines
  • Turntable and slew ring drives
  • Turbine construction
  • Wastewater treatment

Login required

Please log in now to use the requested service

© RINGFEDER POWER TRANSMISSION