• Both CurrentPage.Property["TopNavigationRoot"] Session["TopNavigationRoot"] are null!

TSCHAN® POSIFLEX® - ZEAU

Double engagement design with extended universal hub

The TSCHAN® POSIFLEX®-coupling is a torsionally stiff gear coupling with a certain backlash. It compensates for angular, parallel and axial shaft misalignments within defined ranges. Parallel shaft offset can only be compensated by the double engagement design with two toothing planes. The coupling transmits the torque via hubs with crowned gear teeth which are in permanent mesh with the straight gear teeth of the sleeves. There must be a certain gear tooth circumferential clearance in order to compensate misalignments of the connected machines. The coupling is suitable for horizontal installation in each direction of rotation. For applications involving other than horizontal position, it may be necessary to support the housing or the spacer. Please contact RINGFEDER POWER TRANSMISSION, if this has not been taken into account when selecting the coupling size. It is imperative to use a lubricant that is appropriate for the specific requirements of the gear coupling in order to ensure reliable and continuous operation. Avoid pollution by leaking lubricant.

ZEAU

CAD Size D1 D2 D3 E0 L L3 L4 l1 l1 m
    mm mm mm mm mm mm mm mm mm kg
  67 111 67 80 3 126 41 32.5 43 80 5.1
  87 141 87 103.5 3 167 47 36 50 114 11
  106 171 106 129.5 3 195 58.5 47.5 62 130 19.3
  130 210 130 156 5 227 68.5 56 76 146 33.4
  151 234 151 181 5 260 82 65.5 90 165 49.3
  178 274 178 209 6 281 98 77 105 170 70.7
  213 312 213 247 6 316 108.5 87.5 120 190 107
  235 337 235 273 8 343 121 99 135 200 137
  263 380 263 307 8 378 132 110 150 220 193
  286 405 286 338 8 433 151.5 129.5 175 250 256
  316 444 316 368 8 478 165 143 190 280 322
  372 506 372 426 10 580 183.5 160.5 220 350 506

General features

  • Torsionally rigid gear coupling made of high-quality steel
  • Compensates for angular,radial and axial shaft offset
  • Suitable for use in temperatures up to +130°C if special seals are used
  • Available with split sleeve (ZEA / ZEB - ZEA model range also available in ZEB design) and single-piece sleeve (ZEH)
  • The elastic ring can be replaced without having to move the coupled machines (multi-part models)
  • Bores up to 320 mm
  • Torques up to TKn = 290,000 Nm / TKmax = 580,000 Nm
  • Speeds up to nmax = 5,000 rpm

General description

The POSIFLEX® coupling is a torsionally rigid twin cardanic gear coupling.

Toothing

The coupling housings have a straight internal toothing whilst the hubs have an external toothing with a chased variable radius. As a result, the hubs can move spatially within the housing and thus compensate angular, radial and axial shaft misalignment of the adjoined shaft ends within specified tolerances. Depending on coupling type and size, the standard toothing permits an angular misalignment of up to 0.75 degrees per toothing-plane and an axial movement of several millimetres. The max. possible radial shaft displacement is dependent on the distance between the two toothing planes. Other toothing geometries can be used for further specific applications.

Materials

High-grade tooth profiles and grease with ultra high-pressure additives guarantee low-restoring forces and a long serviceable life. The material used is forged steel with an apparent yielding point of at least 350 N/mm2. Special materials can be used for further specific applications. Sealing is carried out using O-rings and lip-seals of buna N. The housings are centred and held together by fit-bolts and self-locking nuts.

Temperature

The use of special seals permits the temperature limit to be raised to 130 °C.

Balance

At peripheral speeds upwards of 30 m/s it is advisable to dynamically balance the coupling.

Special applications

If greater misalignements are anticipated at higher speeds and torques, an examination is necessary, performed with the assistance of a special computing programme. This is independent of the determined size. The value TKmax may not be exceeded in any state of operation (start-up, electrical short circuit, blocking, etc.).

Tolerances and standards

The bore tolerance is ISO H7, if not differently ordered. The bore diameters listed refer to keyways to DIN 6885/1.

Login required

Please log in now to use the requested service

© RINGFEDER POWER TRANSMISSION