• Both CurrentPage.Property["TopNavigationRoot"] Session["TopNavigationRoot"] are null!

TSCHAN® TNS SV

The TSCHAN® TNS SV coupling is a torsionally flexible, puncture proof claw coupling which is particularly suited for use with hydrodynamic high-speed couplings. It compensates for angular, radial and axial shaft misalignments within defined limits. The coupling transmits torque through elastic buffers loaded in shear. These buffers come in Perbunan (Pb), Pb82 as a standard, or polyurethane (Vk), and are connected to each other to form an elastic buffer ring. This buffer ring dampens shocks and torsional vibrations and is resistant to oil. Buffer rings made of Perbunan are electrically conductive. The coupling is suitable for use in every direction of rotation and installation position.

TSCHAN® TSCHAN S SV

metric inch
CAD Identifier TKNPb82 nmax d1f max A D1 C1 L Gwub
    Nm 1/min mm mm mm mm mm kg
  WS1410 70 7250 27 145 105 50 42 1,7
  WS1412 128 6000 34 170 126 57 47 2,8
  WS1414 220 5250 42 194 145 65 55 4,3
  WS1417 340 4500 58 220 170 75 60 6,8
  WS1420 590 3750 65 250 200 85 65 10,4
  WS1423 900 3250 70 290 230 90 70 13,4
  WS1426 1400 3000 90 335 260 110 85,5 22,8
  WS1430 2090 2500 105 385 300 130 100 36,2
  WS1436-0650 3450 2150 140 455 360 175 123 71,4
  WS1436-0750 3450 2150 140 514 360 175 125 75,4
  WS1440 4750 1900 160 514 400 180 125 94,9
  WS1440-0866 4750 1900 160 595 400 180 125 99,5
  WS1440-1000 4750 1900 160 690 400 180 125 105,9
  WS1440-1150 4780 1900 160 890 400 180 122 133,2
CAD Identifier TKNPb82 nmax d1f max A D1 C1 L Gwub
  ft-lbs rpm inch inch inch inch inch lbs
  WS1410 52 7250 1.063 5.709 4.134 1.969 1.654 3.75
  WS1412 94 6000 1.339 6.693 4.961 2.244 1.850 6.17
  WS1414 162 5250 1.654 7.638 5.709 2.559 2.165 9.48
  WS1417 251 4500 2.283 8.661 6.693 2.953 2.362 14.99
  WS1420 435 3750 2.559 9.843 7.874 3.346 2.559 22.93
  WS1423 664 3250 2.756 11.417 9.055 3.543 2.756 29.54
  WS1426 1033 3000 3.543 13.189 10.236 4.331 3.366 50.27
  WS1430 1542 2500 4.134 15.157 11.811 5.118 3.937 79.81
  WS1436-0650 2545 2150 5.512 17.913 14.173 6.890 4.843 157.41
  WS1436-0750 2545 2150 5.512 20.236 14.173 6.890 4.921 166.23
  WS1440 3503 1900 6.299 20.236 15.748 7.087 4.921 209.22
  WS1440-0866 3503 1900 6.299 23.425 15.748 7.087 4.921 219.36
  WS1440-1000 3503 1900 6.299 27.165 15.748 7.087 4.921 233.47
  WS1440-1150 3526 1900 6.299 35.039 15.748 7.087 4.803 293.66

Coupling with inner hub and claw flange TSCHAN®-TNS SV

The intermediate ring can be replaced after shifting a shaft with fitted hub.

Notes

  • Standard material for intermediate ring: Pb82
  • Installed size L must be maintained without fail. Axial displacement must be taken into account through allowances for value L

General features

  • Torsionally flexible, compensate for angular, radial and axial shaft offset
  • Intermediate rings loaded in compression
  • Elastomers available in various shore hardness degrees
  • Suitable for temperatures from –30°C to +100°C
  • Outer diameter up to 400 mm
  • Bores up to max. 160 mm
  • Torques up to TKn = 13,350 Nm / TKmax = 40,000 Nm
  • Speeds up to nmax = 15,000 rpm

The TSCHAN®-TNS coupling is a torsionally flexible, shock-proof claw coupling. It compensates angular, radial and axial shaft misalignment within specified tolerances.

Elastic intermediate ring

With the TSCHAN®-TNS coupling, the torque is transmitted via a compressed elastic intermediate ring. The elastic intermediate ring absorbs shocks and torsional vibrations, is resistant to oil and largely insensitive to temperature.

Special features

Material

Polyurethane (Vk..) intermediate rings ensure electrical insulation between connected machines as long as there are no other electrically conductive connections. Intermediate rings made of Buna N (Pb) and of grade VkB are normally electrically conductive and can therefore prevent undesirable electrostatic charges.

No torsional vibrations

The torsional elasticity of the intermediate ring allows dangerous torsional vibrations to be transferred from the operational range of the machines to speed ranges in which negative effects are not to be expected.

Reduction in torque shocks

The elastic intermediate rings have a high internal damping characteristic which limits excessive torsional vibrations on reaching dangerous speed ranges, alleviates torque shocks and rapidly eliminates the oscillation stimulated by such shocks. The propagation of structure-borne sound is prevented.

Strength

The strength of different elastomer materials is indicated by their Shore hardness. Elastomers of different strengths are colour-coded for identification. Further details concerning the strength and load capacity are available on request in the technical data sheet.

Temperature

The elastomer materials used here are suitable for ambient temperatures from -30 °C to +100 °C.

Balancing

The coupling is balanced to DIN/ISO 1940, G 6.3 and DIN/ISO 8821 if required. Other qualities are available on request.

Login required

Please log in now to use the requested service

© RINGFEDER POWER TRANSMISSION