• Both CurrentPage.Property["TopNavigationRoot"] Session["TopNavigationRoot"] are null!

Metal Bellows Coupling DKN/S

The DKN/S series is characterized by its compact shapes and a low moment of inertia. The shaft connection can be realized by means of a clamping hub on one side and an expanding clamp on the other. In addition, this pioneering element produced by GERWAH boasts unequalled product quality.

GERWAH® DKN/S

CAD data download is available after login.
metric inch
CAD Size L d1min d1max D1 T nmax ΔKa ΔKw ΔKr TA1 TA2
    mm mm mm mm Nm 1/min mm Grad mm Nm Nm
  4 29 3 8 16,0 0,50 15000 0,20 1,2 0,10 0,3 1,8
  4 31 3 8 16,0 0,50 15000 0,30 2,0 0,15 0,3 1,8
  4 35 3 8 16,0 0,50 15000 0,40 2,0 0,20 0,3 1,8
  9 30 3 8 16,0 1,10 15000 0,20 1,2 0,10 0,3 1,8
  9 33 3 8 16,0 1,10 15000 0,30 2,0 0,15 0,3 1,8
  9 37 3 8 16,0 1,10 15000 0,40 2,0 0,20 0,3 1,8
  15 37 3 10 20,0 1,75 15000 0,25 1,2 0,10 0,8 3,0
  15 41 3 10 20,0 1,75 15000 0,40 2,0 0,15 0,8 3,0
  20 41 3 14 25,0 2,40 15000 0,30 1,2 0,10 1,5 3,0
  20 47 3 14 25,0 2,40 15000 0,40 2,0 0,20 1,5 3,0
  20 51 3 14 25,0 2,40 15000 0,50 2,0 0,25 1,5 3,0
  45 52 5 17 33,0 5,50 15000 0,30 1,2 0,10 3,0 4,0
  45 61 5 17 33,0 5,50 15000 0,50 2,0 0,20 3,0 4,0
  100 61 5 24 40,0 12,00 15000 0,40 1,2 0,15 3,0 6,0
  100 71 5 24 40,0 12,00 15000 0,50 2,0 0,25 3,0 6,0
Size L d1min d1max D1 T nmax ΔKa ΔKw ΔKr TA1 TA2
inch inch inch inch ft-lbs rpm inch degree inch ft-lbs ft-lbs
4 1.142 0.118 0.315 0.630 0.4 15000 0.008 1.2 0.004 0.2 1.3
4 1.220 0.118 0.315 0.630 0.4 15000 0.012 2.0 0.006 0.2 1.3
4 1.378 0.118 0.315 0.630 0.4 15000 0.016 2.0 0.008 0.2 1.3
9 1.181 0.118 0.315 0.630 0.8 15000 0.008 1.2 0.004 0.2 1.3
9 1.299 0.118 0.315 0.630 0.8 15000 0.012 2.0 0.006 0.2 1.3
9 1.457 0.118 0.315 0.630 0.8 15000 0.016 2.0 0.008 0.2 1.3
15 1.457 0.118 0.394 0.787 1.3 15000 0.010 1.2 0.004 0.6 2.2
15 1.614 0.118 0.394 0.787 1.3 15000 0.016 2.0 0.006 0.6 2.2
20 1.614 0.118 0.551 0.984 1.8 15000 0.012 1.2 0.004 1.1 2.2
20 1.850 0.118 0.551 0.984 1.8 15000 0.016 2.0 0.008 1.1 2.2
20 2.008 0.118 0.551 0.984 1.8 15000 0.020 2.0 0.010 1.1 2.2
45 2.047 0.197 0.669 1.299 4.1 15000 0.012 1.2 0.004 2.2 3.0
45 2.402 0.197 0.669 1.299 4.1 15000 0.020 2.0 0.008 2.2 3.0
100 2.402 0.197 0.945 1.575 9.0 15000 0.016 1.2 0.006 2.2 4.4
100 2.795 0.197 0.945 1.575 9.0 15000 0.020 2.0 0.010 2.2 4.4

Characteristics of Metal Bellows Couplings

  • Backlash-free transmission of torque
  • High torsional stiffness, precision of transmission of rotational angle
  • Different torsional stiffness
  • Compact design, low moment of inertia
  • Metal bellows made of stainless steel
  • Simple and safe assembly
  • Compensation of radial, axial and angular misalignment
  • Free of wear, maintenance-free, no downtimes
  • Not sensitive to temperatures between -30°C and +100°C
  • Nominal torques between 0,1 – 5000 Nm

Advantages

  • 100% inspection and traceability through individual marking
  • Higher torques at same dimensions
  • Compact design
  • Extended bore ranges
  • Customer-specific solutions
  • Higher safety in application, e.g. no wrong screw tightening torques

Backlash-free Metal Bellows Couplings are used in the sector of mechanical engineering, where a torque or a rotary motion has to be transmitted from shaft to shaft in highest accuracy of angle.


  • Pumps with axial and vertical drives
  • High dynamic portal drives
  • Spindle lifting units
  • Linear units
  • Packaging machines
  • Machine tools
  • Special machines

Series DKN/S


  • Miniature metal bellows coupling with clamping hubs and expanding clamps

Characteristics


  • Metal bellows made of stainless steel, hubs made of aluminum
  • The shaft tolerance should be within the fit tolerance “g6” or “h7”
  • The contact surfaces have to be free from oil and grease
  • Optional designs with keyway DIN 6885-1
  • Optional special design in stainless steel
  • For the bore tolerances we recommend fit tolerance H7

Login required

Please log in now to use the requested service

© RINGFEDER POWER TRANSMISSION