• Both CurrentPage.Property["TopNavigationRoot"] Session["TopNavigationRoot"] are null!

Coupling 5085

Backlash-free Metal Bellows Coupling

Absolutely backlash-free • Life time proof and maintenance-free
Accurate transmission characteristics • Installation and removal friendly
Rear installation space • High misalignment compensation

5085 ECOLOC

metric inch
CAD Size d1min d1max D1 L T nmax ΔKa ΔKw ΔKr DG1 TA1
    mm mm mm mm Nm 1/min mm Grad mm mm Nm
  0,9 3 8 16 30 0,9 15000 0,4 2 0,2 M2 0,3
  1,5 3 10 20 30 1,5 15000 0,4 2 0,15 M2,5 0,8
  2 3 12 25 42 2 15000 0,5 2 0,25 M3 1
  4,5 6 16 33 50 4,5 15000 0,5 2 0,2 M4 3
  10 6 19 40 57 10 15000 0,5 2 0,25 M4 3
  18 10 25 45 71 18 12700 0,5 1,5 0,2 M5 6
  30 10 25 55 73 30 10200 0,5 1,5 0,2 M6 12
  60 14 32 64 89 60 8600 0,5 1,5 0,2 M8 30
  150 20 40 80 103 150 6800 0,5 1,5 0,2 M10 85
  200 25 44 90 113 200 6300 0,5 1,5 0,2 M12 100
  300 32 50 110 115 300 5900 0,5 1,5 0,2 M12 120
  500 40 60 119 122 500 4900 1 1,5 0,2 M14 190
CAD Size d1min d1max D1 L T nmax ΔKa ΔKw ΔKr DG1 TA1
  inch inch inch inch ft-lbs rpm inch degree inch mm ft-lbs
  0.9 0.118 0.315 0.630 1.181 0.7 15000 0.016 2 0.008 M2 0.22
  1.5 0.118 0.394 0.787 1.181 1.1 15000 0.016 2 0.006 M2,5 0.6
  2 0.118 0.472 0.984 1.654 1.5 15000 0.02 2 0.010 M3 0.75
  4.5 0.236 0.630 1.299 1.969 3.3 15000 0.02 2 0.008 M4 2.2
  10 0.236 0.748 1.575 2.244 7.4 15000 0.02 2 0.010 M4 2.2
  18 0.394 0.984 1.772 2.795 13 12700 0.02 1.5 0.008 M5 4.5
  30 0.394 0.984 2.165 2.874 22 10200 0.02 1.5 0.008 M6 9
  60 0.551 1.260 2.520 3.504 44 8600 0.02 1.5 0.008 M8 22
  150 0.787 1.575 3.150 4.055 111 6800 0.02 1.5 0.008 M10 63
  200 0.984 1.732 3.543 4.449 148 6300 0.02 1.5 0.008 M12 75
  300 1.260 1.969 4.331 4.528 221 5900 0.02 1.5 0.008 M12 88
  500 1.575 2.362 4.685 4.803 369 4900 0.039 1.5 0.008 M14 140

5085 ECOLOC

  • Rear installation space
  • High misalignment compensation

Dimensions

  • L = Total length of coupling
  • D1 = Outer diameter of hub 1
  • H = Clearance diameter
  • d1/d2 = Bore diameter
  • C1 = Guided length shaft bore d1
  • K = Distance shaft axis - clamping screw axis
  • I = Distance between clamping screw hole and hub end
  • DG1 = Thread

Characteristics

  • Metal bellows made of stainless steel, hubs made of aluminum
  • The shaft tolerance should be within the fit tolerance "g6" or "h7"
  • The contact surfaces have to be free from oil and grease
  • Optional designs with keyways DIN 6885-1

Login required

Please log in now to use the requested service

© RINGFEDER POWER TRANSMISSION